The Design House 784918 Scroll 2-Way Latch Entry Door Handle accepts a key on one side of the lock but is operated by a turn-button knob on the other side. Finished in satin nickel and designed for left or right-hand doors, this handle fits the two most common backsets in the U.S. (2-3/4 inches and 2-3/8 inches). The 1/2 inches latch bolt is plated in nickel and does not budge once in place. Use this handle on standard 1-3/8 inches and 1-3/4 inches thick doors. This product has a 1 inch by 2-1/4 inches radius corner faceplate. If you are preparing your door for installation, the cross bore should be 2-1/8 inches in diameter and the edge bore should be 1 inch in diameter. This product is ANSI Grade-3 certified and rated for residential security.

• Material: Brass
• Finish: Satin nickel, silver
• Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
• Entry Lock; operated by a key on the exterior and is by a turn-button knob on the interior.
• 5-Year limited mechanical/5-Year limited finish warranty
• Finished in satin nickel and is designed for left or right hand doors
• ANSI Grade-3 Certified for residential security

• Product Dimensions: 2.63" H x 6.38" W x 2.56" D
• Product Weight: 2.14 lbs
• Warranty: 5-Year limited warranty
• Weight Capacity: n/a