The Design House 753467 Cambridge 2 way latch entry door knob is finished in oil rubbed bronze and designed for left or right hand doors. The flat ball handle fits comfortably in your hand, and the bronze finish matches your homefoots decor. This knob fits the two most common backsets in the U.S. (2.75" and 2.375"). The 1/2" latch bolt is plated in nickel and does not budge once in place. With privacy in mind, this product accepts a key on one side of the lock but operates by a turn button knob on the other side. Use this knob on standard 1.375" and 1.75" thick doors. This product has a 1" by 2 1/4" radius corner faceplate and 5 pin security. If you are preparing your door for installation, the cross bore should be 2 1/8" in diameter, and the edge bore should be 1" in diameter. This product is ANSI Grade 3 certified and rated for residential security.

• Material: Brass
• Finish: Bronze
• Finished in oil rubbed bronze and designed for left or right hand doors
• Fits 2.75 inch and 2.375 inch backsets; fits 1.375 inch and 1.75 inch thick doors
• Entry lock; operated by a key on the exterior and is by a turn button knob on the interior.

• Product Dimensions: 2.63"H x 2.63"W x 2.56"D
• Product Weight: 1.34 lbs
• Certifications and Listings: ANSI grade 3 certified for residential security
• Warranty: 5 years limited